FAQ

Questions OT teams ask first

What VigiaOT does on your network, what it does not, and what it costs — answered from how the product actually works.

Safety

On a production network

Does VigiaOT write to PLCs or change their configuration?

No. Each protocol probe sends only the identification request the vendor’s own engineering tools use: Siemens S7 reads System Status Lists, EtherNet/IP sends List Identity, Omron FINS sends Controller Data Read, BACnet sends Who-Is. Nothing is written, no operating mode is changed, and no CIP connection is held open.

Is it safe to scan a running plant?

Scanning is gentle by default: plain TCP connections with short timeouts, a configurable pace, and an exclusion list for fragile devices you don’t want touched at all. Serial-converter probes (Allen-Bradley DF1) only run on a device a person has approved. As with any active scan, start with a small range you know.

Does it need admin rights or a packet-capture driver?

No. The installer runs per user, without elevation, and scanning uses no raw sockets and no capture driver such as Npcap — the things that usually block a tool on a locked-down, IT-managed laptop.

Does it work without internet access?

Scanning, review and the inventory work fully offline — the laptop needs no network beyond the cell it is scanning. Vulnerability analysis (Solo Analytics) looks devices up in NVD, the European Vulnerability Database (EUVD) from ENISA and CISA KEV (EUVD is switched on in the analysis settings), so it needs an internet connection when it runs — typically once the laptop is back on the office network. EUVD is the EU’s official vulnerability database under NIS2.

Where is the data kept? Does anything go to CodeBox?

The inventory stays on the laptop, in the app’s local database — there is no cloud account. Licensing is offline: a signed key bound to the machine, with no call home. Vulnerability lookups send NVD (and EUVD, if enabled) only product identifiers — vendor, model, version — never IP addresses or the inventory itself.

Coverage

What it identifies

Which vendors and protocols does it identify?

Siemens (S7), Rockwell / Allen-Bradley (EtherNet/IP, and DF1 behind serial-to-Ethernet converters), Omron (FINS), Beckhoff (ADS), Schneider Electric (Modbus, including the Modicon CPU name), plus BACnet, OPC UA, SNMP, MQTT, mDNS and embedded web interfaces. Any other device is still found, with its vendor from the MAC address registry.

What does it find out about each device?

As far as the device’s own protocol reports it: vendor, model or order number, firmware version and, where available, name and serial number — the level of detail that makes a vulnerability check meaningful. Fields a scan cannot read, such as owner or end of life, can be typed in.

Compliance

NIS2 and IEC 62443

Does VigiaOT help with NIS2 and IEC 62443?

Yes, as audit evidence. The Excel inventory report is laid out for an asset-inventory audit: scope and coverage, devices, change log, IEC 62443 zones, and a compliance-mapping sheet against NIS2 Implementing Regulation 2024/2690 (12.4), ISO/IEC 27001 A.5.9 and IEC 62443-3-3 SR 7.8. It supports an audit; it does not by itself make you compliant.

What reports does it produce?

An Excel inventory and compliance workbook, in every edition including the free one. With Solo Analytics, also the vulnerability findings and a one-page management summary PDF, written for the management body’s oversight under NIS2 Article 20.

Pricing

Licensing and price

Is there a free version?

Yes. The free version inventories up to 5 devices, with no time limit; it does not include vulnerability analysis. From inside the app you can request a 30-day trial that adds vulnerability analysis. Download it free.

How much does it cost?

Perpetual licenses start at €750. Vulnerability analysis keeps itself current through a yearly vulnerability-feed subscription. Licenses are not priced per device. Ask for a quote.

What happens when a trial or subscription ends?

Your data is never locked away: the inventory and past results stay readable and exportable. When a trial ends the app falls back to the free version; when the feed subscription ends, existing results stay available but no new analyses run.

Is a license tied to one computer?

Yes, a license is bound to one machine through its activation code. If the laptop is replaced, the license is moved to the new one.

Platforms

Where it runs

Which operating systems does it run on?

Windows, macOS and Linux. Windows is what most field laptops on customer IT networks run.

Does it need a server or appliance?

Not for Solo: everything runs on one technician’s laptop. For a whole plant, Site adds one on-site appliance, VIGIA-IOTBOX, that every laptop reports to.

Another question? Ask us directly.